Dynam AT-6 Texan 1370mm PNP RC Airplane
1.Powerful BM3715A-KV1050 Brushless Outrunner motor was installed inside
2.it reqires 5 Channel Radio
3.it requires 5 Channel Receiver
if you want to know wholesale discount price,please contact us by e-mail.
Note:
If your shipment is deliveyellow to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
The North American Aviation T-6 Texan is a single-engined advanced trainer aircraft used to train pilots of the United States Army Air Forces (USAAF), United States Navy, Royal Air Force and other air forces of the British Commonwealth during World War II and into the 1970s. Dynam's AT-6 Texan PNP is an exciting reproduction of the classic WWII trainer. It is virtually ready for the sky. Servoless electronic retractable landing gear is included. All you need is a 5 channel radio, 5 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready for takeoff from your favorite runway for those training missions.
Features:
- LED navigation lighting with LED control board (no more bare leads)
- Realistic scale features including attractive, classic AT-6 paint scheme and molded panel lines
- Servoless electronic retractable landing gear
- Powerful BM3715A-KV1050 Brushless Outrunner motor
Includes:
- Dynam AT-6 Texan 1370mm (53 inch) Wingspan - PNP
- ESCs with XT60 connector, servos, motors and electronic retractable landing gear come pre-installed for your convenience
- Decal set
Requires:
- 5 Channel Radio - Select a minimum 5 channel radio
- 5 Channel Receiver - Select a minimum 5 channel receiver
- 3 Cell 11.1V 2200 mAh LiPo Battery with XT60 connector
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger
Wingspan |
1370mm / 53in |
Length |
895mm / 35.23in |
Flying Weight |
1250g / 44.09oz |
| CG (Center of Gravity) | 70 - 75mm from the leading edge at the wing root |
Power System |
BM3715A-KV1050 Brushless Outrunner motor |
Electronic Speed Control |
30A Brushless with XT60 connector |
Propeller / EDF |
2 blade propeller |
Servos |
4x 9g standard |
| Landing Gear | Retractable |
Required Battery |
3S 11.1V 2200mAh 20C LiPo (required) |
Required Radio |
5 Channel (required) |
| Ailerons | Yes |
Elevator |
Yes |
| Rudder | Yes |
Flaps |
No |
Lights |
Yes |
Hinge Type |
Foam |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 3 Hours |
| Recommended Environment | Outdoor |
